High Quality OEM Resistant Grate Suppliers - Cast steel grate bars, wear parts of waste to energy furnace – Xingtejia
High Quality OEM Resistant Grate Suppliers - Cast steel grate bars, wear parts of waste to energy furnace – Xingtejia Detail:
1. Casting process: Shell mold precision casting
2. Steel grade: GX130CrSi29(1.4777) ( Also can be as your requirement)
3. Dimensional Tolerance of cast: DIN EN ISO 8062-3 grade DCTG8
4. Geometrical Tolerance of cast: DIN EN ISO 8062 – grade GCTG 5
5. Application: Waste to energy incineration plants.
Garbage disposal is now a very serious global problem. Trash to energy is the currently most reasonable treatment. In recent years, many countries with strong economic strength have begun to pay attention to this point. A lot of money has been invested in the construction of waste incineration power plants. This has not only brought great improvement to our environment. At the same time, it has brought us great economic benefits.
As shown in the figure, grate bars play an important role in waste incineration. In high temperature and very harsh environment, Low quality grate will greatly affect the efficiency of waste incineration, and its service life is very short. You need to replace it very often.
However, with over 10 years casting experience, we can solve the problems for you.
Steel Grade we usually use. (It can also be as your requirements.)
Chemical composition % of steel GX130CrSi29 (1.4777): EN 10295-2002
|
C |
Si |
Mn |
Ni |
P |
S |
Cr |
Mo |
|
1.2 – 1.4 |
1 – 2.5 |
0.5 – 1 |
max 1 |
max 0.035 |
max 0.03 |
27 – 30 |
max 0.5 |
Chemical composition % of steel GX40CrNiSi27-4 (1.4823): EN 10295-2002
|
C |
Si |
Mn |
Ni |
P |
S |
Cr |
Mo |
|
0.3 – 0.5 |
1 – 2.5 |
max 1.5 |
3 – 6 |
max 0.04 |
max 0.03 |
25 – 28 |
max 0.5 |
Chemical composition % of steel GX40CrNiSi25-20 (1.4848): EN 10295-2002
|
C |
Si |
Mn |
Ni |
P |
S |
Cr |
Mo |
|
0.3 – 0.5 |
1 – 2.5 |
max 2 |
19 – 22 |
max 0.04 |
max 0.03 |
24 – 27 |
max 0.5 |
Chemical composition % of steel GX40CrNiSi25-12 (1.4837): EN 10295-2002
|
C |
Si |
Mn |
Ni |
P |
S |
Cr |
Mo |
|
0.3 – 0.5 |
1 – 2.5 |
max 2 |
11 – 14 |
max 0.04 |
max 0.03 |
24 – 27 |
max 0.5 |
| Mechanical properties(ASTM A297 Grade HH)1.4837 | UTS: Min 75 Ksi/515 Mpa |
| YS: Min 35 Ksi/ 240 Mpa | |
| Elongation: in 2 in: Min 10 % | |
| Hardness: Min 200 BHN (3 places on speciment)” | |
| Microstructure/Metallography | Predominantly Austenitic structure containing dispersed carbides |
| SoundnessTest/X-ray or UT | RT per ASTM E446 Level II |
| UT per ASTM A609 Level II | |
| NDT/LPI or MPI | MPI as per ASTM E709/E125 LEVEL II |
| LPI as per ASTM E165 Level II” | |
| Final Visual Inspection | ASTM A802 Level II |
| Package | Iron case or Wooden case. |
Our Main Market Are
OEMs and engineering companies
Waste to Energy plants
Operating companies
Biomass units
Coal-fired power plants
Service companies for maintenance operations
Different kinds of OEM grate bars
Well finished grate bars
Mature Process And Strict Quality Control Is Why will you choose us
For more inquiries or technical questions, please contact XTJ Service Team. We will provide the most reasonable technical solution and the best quotation according to your product.
Product detail pictures:
Related Product Guide:
Our target should be to consolidate and improve the high-quality and repair of current goods, in the meantime regularly produce new solutions to meet unique customers' needs for High Quality OEM Resistant Grate Suppliers - Cast steel grate bars, wear parts of waste to energy furnace – Xingtejia , The product will supply to all over the world, such as: Jakarta, Houston, Uruguay, You can let us know your idea to develop unique design for your own model to prevent too much similar parts in the market! We will provide our best service to satisfy all your needs! You should contact us right away!
By Jeff Wolfe from New Delhi - 2018.09.29 17:23
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Jean Ascher from Malaysia - 2017.10.27 12:12
Related products
-
High Quality OEM Cast Iron Grate Bar Factories ...
1. Casting process: Shell mold precision casting 2. Steel grade: GX130CrSi29(1.4777) ( Also can be as your requirement) 3. Dimensional Tolerance of cast: DIN EN ISO 8062-3 grade DCTG8 4. Geometrical Tolerance of cast: DIN EN ISO 8062 – grade GCTG 5 5. Application: Waste to energy incineration plants. Garbage disposal is now a very serious global problem. Trash to energy is the currently most reasonable treatment. In recent years, many countries with strong economic strength have begun...
-
China Wholesale Wear Boiler Parts Exporters - ...
The service life of tube shields is has a great relationship with the selected material. Generally, high quality tube shields such as 310S have a longer service life. The normal service life of tube shield is an overhaul cycle (3-5 years). Generally, the boiler will replace or add some parts every time it is overhauled. The main parts to be replaced are those with serious wear, thinning and exceeding the standard. And also which fall off during the operation of the boiler, because the install...
-
China Wholesale Stainless Steel Suppliers - Pu...
Buy XTJ’s high quality alloy refiner plates Keep reducing your manufacturing cost with Parason Latest Technology Refiner Plates. It help’s to Increase output, uniform and consistently produce high quality of pulp. XTJ Finedge Curved Bar refiner plates are special cast in own foundry provide uniform hardness throughout. The plates will wear uniformly over a time and have a longer bar length. The flow of pulp follows the grooves between the bars results in longer residence time. Th...
-
China Wholesale Gratings Companies - Trash inc...
Heat resistant castings are typically made out of stainless steels that have a high Chromium and Nickel count. Castings made out of heat resistant alloys are excellent for components exposed to dry gases at high temperatures for long periods of time. Industries that benefit from heat resistant castings include Energy, Engines, Furnaces/Ovens, and Petrochemical. Heat resistant steel castings are also referred to as oxidation resistant steel castings, refractory steel castings, heat resistant...
-
High Quality OEM Guide System Suppliers - Cast...
Guide roller is the main consumption tool of high-speed wire rod mill, which requires high wear resistance, steel sticking resistance and thermal fatigue resistance. Ordinary austenitic heat-resistant steel, martensite wear-resistant steel or wear-resistant cast iron guide roller can not meet the above requirements. Their service life are short, which reduces the operation rate of the mill. Cemented carbide guide roller has good wear resistance and high temperature stability, good ...
-
China Wholesale Resin Sand Cast Liners Supplier...
As We have supplied many pellet plants for many years, our casting and machining processes have been very mature. In recent years, almost no customer complaints have been received. If you have any demand, please contact our team. We will give you professional solution. The material we use on these parts are usually heat resistant steels. Heat resistant is the material with high strength and stability used at high temperature. It is often used in industries and fields such as metallurgy, heat ...
